Higher safety isolation transformer with 100 kVA power rating, is available in the circuit of AC 50Hz/ 60Hz. It can step down 3 phase voltage 400V to 208V, step up 208V to 400V type is available to select, designed for use in control circuits and general applications such as mechanical and electronic equipment, precision machine tool, CNC machine tool, lighting, etc.

100 kVA Isolation Transformer Specifications

Note:

Transformer can only convert voltage and CANNOT convert frequency.
Transformer CANNOT convert single phase voltage to 3 phase voltage.
Input/output voltage, power rating and whether with shell of all transformers, can be customized according to clients' requirements.

3 Phase Isolation Transformer Schematic Diagram

3 Phase Isolation Transformer Details

100 kVA Isolation Transformer Installation Dimension

Tips: Difference between three-phase isolation transformer wiring Dyn11 and Dyn0

1. When the secondary side load of step up/down transformer is not asymmetrical, Dyn11 wring is smaller than that of Yyn0.
2. Dyn11 wiring can improve the sensitivity of the transformer over-current relay protection device and simplify the wiring protection.
3. Dyn11 wiring can improve the low-voltage side and the sensitivity of protection device, which is conducive to the selectivity of every level protection device and the expansion of feed radius.
4. The secondary zero line current of Dyn11 wiring isolation transformer is not limited. This is a great advantage of Dyn11 wiring, but Yyn0 secondary zero line current is not allowed to exceed 25%.
5. The primary winding of Dyn11 wring has the phase voltage three times larger than the one of Yyn0 and the current three times smaller, so Dyn11 wring is characterized by thinner wire diameter, larger turning number and more insulation inter-layer.