Search
Test & Measurement
Vortex Flow Meter for Liquid/Gas/Steam, DN15-DN300
$957.85
SKU: CHN-FLOW-VOR
Low cost vortex meter can measure the flow rate of liquids, gases and steam, applicable pipe size from DN15 to DN300. High accuracy vortex flowmeter has fully i...
Magnetic Flow Meter for Sewage Water/Wastewater, DN15-DN200
$842.03
SKU: CHN-FLOW-MAG
Magnetic flow meter or electromagnetic meters for all conductive liquids like wastewater/sewage water, nominal diameter DN15, DN20, DN25, DN32, DN50, DN100, DN1...
Portable Dew Point Meter with Intergral Prob
$5966.19
SKU: CHN-DPM-500
Portable dew point meter with intergral prob, graphic display, easy operation with touch function, USB port, measuring range -80~+50°Ctd, pressure ran...
Portable Dew Point Meter for Compressed Air
$6998.12
SKU: CHN-DPM-510
Portable dew point meter for compressed air, interfaces usb, measuring range -80~+50 °Ctd, 20~+70°C, can be connected with sensors, sensor out...
Electronic Torque Adapter, 0.1-0.5mm/ 0.2-1mm/ 0.4-2mm
$695.56
SKU: CHN-EQBH
Cost-effective electronic digital torque adapter for sales, 0.1-0.5mm/ 0.2-1mm/ 0.4-2mm three operating torque for selection, division value 0.0001Nm/ 0.001Nm,...
Digital Torque Adapter, 30Nm/ 135Nm/ 200Nm
$63.49
SKU: CHN-ENC
Cheap price digital torque adapter online for sale, 30Nm/ 135Nm/ 200Nm three rated torque can be chosen, minimum graduation value 0.01Nm, three working mode for...
3 Phase AC Digital Panel Volt Meter
$426.25
SKU: CHN-PANEL-VM
Favorable price digital panel volt meter can measure 3 phase voltage AC 100V, 220V, 380V in three phase electric network with high accuracy, LED or LCD display,...
3 Phase AC Digital Ampere Meter
$612.39
SKU: CHN-PANEL-AM
Digital display panel ampere meter can measure 3 phase AC current 1A ~ 5A in three phase electric network with high accuracy, monitor analog input and switch in...
5 Digit Display Controller for Load Cells, RS485/ 4-20mA Output
$247.85
SKU: CHN-DPM-DY220
5 digit display controller can cooperate with load cells, force sensors and weighing sensors, RS485/ 4-20mA/ 0-10V transmitting signal output, digital panel met...
Precision Digital Panel Meter for Grating Ruler 7 Digit
$226.15
SKU: CHN-DPM-GR7D
Multichannel digital panel meter for precision linear displacement sensor has power failure memory function, anti-interference, high-precision, high-speed, anti...
Digital Panel Meter for Potentiometers 5 Digit
$226.15
SKU: CHN-DPM-DS5D
Single channel digital panel meter can cooperate with displacement sensors, linear position sensors, potentiometers, etc. 16-bit A/D converter, zero clearing at...
Digital Torque Meter for Dynamic Torque/Speed/Power, 5 digit
$489.98
SKU: CHN-DPM-RTS5D
Digital torque meter with 3-channel 5 digit LED can real-time display dynamic torque, speed and power value. The measuring range of torque can be -99999~99999 N...
5 Digit Display Controller for Load Cells
$210.80
SKU: CHN-DPM-LC5D
Digital panel meter can cooperate with load cells, force sensors and weighing sensors, two outputs for data comparison, digital panel meter can display gross, n...
Digital Panel Meter for RTD/Pressure/Level Sensor, Double 4 Digit
$97.88
SKU: CHN-DPM-USD4D
Intelligent digital panel meter has double 4 digit LED for PV and SV display. Digital display controller also has optional fuctions of 2 alarms, 1 transmit anal...
Digital Panel Meter for Displacement Sensor 4 Digit
$164.62
SKU: CHN-DPM-DS4D
Single channel digital panel meter cooperate with all kinds of analog output sensor and transmitter, realize measurement, conversion, display, transmitting, rec...
3 Axis Digital Readout, DRO for Mills, Lathes
$295.28
SKU: CHN-DR-WE68003
DRO digital Readout 3 axis, input signal TTL, resolution 0.2 um, 5 um, um, um 20, or 50 um, it can be used for milling machine, lathes, surface grinders, grizzl...
2 Axis Digital Readout, DRO for Mills, Lathes
$249.86
SKU: CHN-DR-WE68002
High precision digital readout 2 axis, resolution 0.1um, 0.2um, 0.5um, 1um, 5um, 10um or 50um, input voltage 90-240V. DRO digital readout can be connected with ...
1 Axis Digital Readout, DRO for Mills, Lathes
$358.46
SKU: CHN-DR-WE100
Single DRO axis digital readout, resolution 0.05um, 0.1um, 0.2um, 0.5um, 1um, 2um, 5um, 10um, 20um or 50um. Input voltage DC 9V, 50Hz-60Hz, for milling machine ...
Digital Counter, 8 Digit, Up/Down, Number/Length/Batch
$124.98
SKU: CHN-DIGC-FH8D
8 digit counter can be used for counting number/length/batch, position control of balers controlled by variable frequency motor, and measuring height, position ...
Digital Counter, 6 Digit, Frequency/Rev/Speed
$160.98
SKU: CHN-DIGC-FA6D
Digital counter is suitable for measuring the frequency, rotational speed, linear speed and flow of various types of control equipment. 6 digit counters can be ...
Test & Measurement
Safe Shopping
