Digital readout input voltage 90VAC- 240VAC, 50-60 Hz. Stable and powerful function, can be used for milling machines, lathes, surface grinders, grizzly planer and other machine tools.
After purchasing a ATO DRO digital readout, you can buy a linear scale for milling machine, lathes or table saw fence.
Specifications
Model | CHN-DR-WE68003 |
Axis number | 3 Axis |
Resolution | 0.05μm, 0.1μm, 0.2μm, 0.5μm, 1μm, 2μm, 5μm, 10μm, 20μm, 50μm |
Input Signal | TTL, Frequency < 2MHZ, Current > 1mA |
Input Voltage Range | 90 VAC-240V AC |
Power | Less than 15W |
Max Measuring Length | 900mm |
Frequency | 50 Hz - 60 Hz |
Anti Interference Capability | Over 2200V |
Dimension | 296mm x 184mm x 44mm |
Dimension (unit: mm)
Tips: Digital Readout Advantages
1. Digital readout has the function of attaching machine, which can load and unload at any time. It is common with other machine tools.
2. Installation and adjustment procedures without other devices are convenient for maintenance.
3. The wide range of USES, digital readout not only can be used for milling, drilling, boring and turning processing routine tasks, but also for many machine tools, measuring equipment and test equipment and special machine tools to provide the ideal solution, in fact it is suitable for all manual machine tools.
DRO digital Readout 3 axis, input signal TTL, resolution 0.2 um, 5 um, um, um 20, or 50 um, it can be used for milling machine, lathes, surface grinders, grizzly planer ang optical comparator. The maximum measured length is 900mm, simple operation, stable and reliable.