S type tension and compression load cells have capacity range from 0.5kg, 1kg, 5kg, 10kg, 30kg to 200kg (5N to 2000N). Load cell capacity can be customized according to customer requirements.
After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.
Specification:
Model | CHN-LCS-DYLY-108 |
Weight | 0.1kg |
Capacity range * | 0kg~200kg (0~2000N) |
Accuracy | 0.05%F.S (linearity + hysteresis + repeatability) |
Sensitivity | 2.0±0.2mV/V |
Creep | ±0.05%F.S/30min |
Zero output | ±2%F.S |
Temperature effect on zero | ±0.05%F.S/10℃ |
Temperature effect on output | ±0.05%F.S/10℃ |
Operating temperature | -20℃~+80℃ |
Input impedance | 350±30Ω |
Output impedance | 350±5Ω |
Insulation resistance | ≥5000MΩ/DC 100V |
Safety overload | 150%F.S |
Ultimate overload | 300%F.S |
Bridge voltage (excitation voltage) | DC 5V |
Maximum bridge voltage | DC 15V |
Material | 17-4PH stainless steel |
Protection class | IP66 |
Cable length | 1.5m |
Wiring | EXC+: Red, EXC-: Black, SIG+: Green, SIG-: White |
Dimension:
Capacity | Dimension (mm)
|
N | kg | M | H | A | B |
5, 10, 20, 30, 50, 100 | 0.5, 1, 2, 3, 5, 10 | M3 | 5 | 16 | 19.1 |
200, 300, 500 | 20, 30, 50 | M4 | 6 | 16 | 19.1 |
250, 300, 500, 1000, 2000 | 25, 30, 50, 100, 200 | M8 | 14 | 26 | 40 |

Tips:
S type micro load cell can bear both tension and pressure, with small size 5*16*19.1mm, good stability, good output symmetry, high accuracy, low temperature drift, compact structure and overload protection. Micro load cell is suited to use in restricted spaces such as manipulator and robot, and specifically used for button tester and force gauge.