Close
Shopping Categories
Search

7.5kW AC Synchronous Generator, 1-phase/ 3-phase


$1394.13
7.5kW single phase/ three phase AC synchronous generator with cheap price for sale. Brush AC generator featuring rated capaci
SKU: CHN-ASG-STC-7.5
Free Shipping Worldwide
Delivery date: 6-12 days

Good price brush AC generator with 1500 r/min rated speed, 4P, rated voltage single phase 220V/ 230V/ 240V, three phase 380V/ 400V/ 460V. Alternating current generator has an elegant appearance, sturdy and durable structure, convenient maintenance and long service life.

Specification

ModelCHN-STC-7.5
Rated power7.5kW
Rated capacity9.4kVA
Rated current13.5A
Power factor0.8 cosφ
Pole number4 pole
Rated speed1500 r/min
PhaseSingle phase/ Three phase
Rated voltage220V (230V/ 240V can be customized)/ 380V (400V/ 460V can be customized)
Frequency50Hz
Weight78kg
CertificateCE
Warranty12 months

Dimension

Dimension of AC synchronous generatorDimension of AC synchronous generator

ModelMounting dimensions (mm)Outer dimensions (mm)
ABCDEFGHKabh1hL1L2g
STC-7.5254254108388012331601650310255858032541

Tips: Normal Maintenance of AC Synchronous Generator.

Test the AC generator once a week with no load and run for 10-15 minutes in order to discover problems in time and ensure that the battery has sufficient capacity for the generator to start.
1. Before maintenance, the automatic air switch of the brush AC generator should be cut off, the main switch should be placed in the stop position, and the positive and negative power cords of the battery should be folded to confirm that the generator cannot be started.
2. Check the battery electrolyte level, if it is insufficient, add sulfuric acid solution or distilled water according to its concentration.
3. Calculate the cumulative running time of the generator from the last time. The air filter should be cleaned every 50 hours, and the oil filter, diesel filter, and water filter should be replaced every 250 hours.
4. Check whether the unit has water or oil leakage, and clean the generator body.
5. Connect the battery power cord and connectors properly, and the test failure indicator lights should all be on.