Close
Shopping Categories
Search

Electrical Conductivity Meter for Water, 200mS/cm, DC 9V


$476.19
Electrical conductivity meter with a conductivity electrode (K=1) has measuring range 0~200mS/cm, power supply DC 9V, accurac
SKU: CHN-CDTYM-200
Free Shipping Worldwide
Delivery date: 6-12 days

Electrical conductivity meter with matched conductivity electrode & conductivity standard solution has measuring range 0~200mS/cm, 50 groups data storeage of serial number, measured value, unit, temerature, DC 9V power supply.

Specification:

ModelCHN-CDTYM-DDS-11C
Shipping weight3kg
Dimension160*190*70mm (L*W*H)
Measuring range0~199.9μS/cm, 200~1999μS/cm, 2.00~19.99mS/cm, 20.0~199.9mS/cm
AccuracyElectrode: ±1.0%FS, meter & electrode: ±1.5%FS
Resolution0.1/1μS/cm, 0.01/0.1mS/cm
Temperature compensation0~50℃ (32~122℉) manual/automatic
Electrode constantK=0.1/1/10 cm-1
DisplayLCD display can show:
a. measuring mode
b. measured value
c. unit
d. temperature compensation
e. temperature value
f. store/recall
g. measurement stability
Operation keysON/OFF, CAL, MODE, UP & DOWN, STORE/RECALL, ENTER
FunctionsAutomatic celebration, automatic temperature compensation, automatic storage (50 groups data storage of serial number, measured value, unit, temerature)
Power supply9VDC/300mA
Working temperature5~35℃ (41~95℉)
Working humidity≤85%
Package included1 * Electrical conductivity meter (Model: CHN-CDTYM-DDS-11C)
1 * Conductivity electrode (Model: CHN-CDTYM-2301-F, K=1, ATC)
1 * 1408μS/cm conductivity standard solution (50ml)
1 * Power adapter 9VDC
1 * Bracket (Model: CHN-CDTYM-600)
1 * User manual
CertificateISO 9001:2000, CE, CMC

Tips: How to calibration electrical conductivity meter

  1. Press <ON/OFF > key to turn on the electrical conductivity meter.
  2. Connect the CHN-CDTYM-2301-F plastic conductivity electrode to the meter.
  3. Electrode Calibration:
    Press < CAL > key, "CAL" flickering on the upper right corner of LCD. It indicates meter is in the calibration mode. Wash the conductivity electrode with purified water and shake it forcefully, then insert it into the 1413μS/cm calibration solution, stir it and stay for a while. When ":)" icon appears, means the display value is stable. Press < CAL > key again, LCD will display flickering "1.413mS/cm", several second later the "End" icon will appear and donductivity meter will return to the measuring mode. Calibration steps can be repeated until the measuring value stable and accurate.

Note: Electrical conductivity meter has been calibrated before delivery, and can be used directly.