Magnetostrictive level sensor with measuring range 1000mm is used for the liquid level preset and feedback, such as the liquid level of sewage. Magnetostrictive transducers also can be used in most industrial automation systems.
Specification:
Basics | Model | CHN-MSL-1000 |
Measuring range | 0~1000 mm |
Shipping weight | 5.5 kg |
Length | 1199.3 mm |
Diameter | 50 mm |
Technical parameters | Linearity | ≤0.03%FS |
Repeatability | ≤0.003%FS |
Resolution ratio | ≤0.001%FS |
Hysteresis | ≤0.001%FS |
Working Voltage | 24V /12V DC |
Working current | Voltage /digital output type≤16mA; Current output type≤35mA |
Output method | 0~5V / 0~10V / 4~20mA / 0-20mA RS485 binary digital signal / SSI gray code signal |
Product type | Normal type; Explosion-proof type; Anti-corrosion type |
Measuring rod material | 0Cr18Ni9 (304) or 316L stainless steel (secial custom-made) |
Measuring rod diameter | Ф10mm |
Electronic bin material | 1Cr18Ni9 (304) |
304 and PTFE casing outside (Anti-corrosion type, special custom-made) |
1Cr18Ni9Ti and protection cover outside (Anti-corrosion type, special custom-made) |
Connecting screw thread | M18×1.5; M20×1.5; 3/4-16UNF |
Type of lead wire | PVC shielded cable; aviation plug (not applicable to explosion-proof type) |
Measuring rod pressure | 40MPa, 70MPa (Explosion-proof type) |
Temperature | T1: 0~+ 70℃, T2: -25~+80℃, T3: -40~+120℃ |
Buffer area | Front-end of buffer 50.8mm (electronic bin), the end of the buffer 63.5mm (the buffer area can be custom-made) |
Vibration | 100g, IEC standards 68-2-715g /10-2000Hz IEC standards 68-2-6 |
Protection Class | IP67 |
Explosion-proof level | Explosion-proof type: EXd II BT5 |
Installation diagram (unit: mm):

Tips: Three module of magnetostrictive displacement sensor
Magnetostrictive sensor consists of three modules: measurement module, position detection module and circuit measurement module, in which the measurement module is composed of waveguide tube, waveguide wire, signal output terminal and front damping component. Position detection module is composed of steel ring and embedded permanent magnet block, in which the outer diameter of the steel ring can be changed according to actual requirement; Circuit measurement module is comprised of signal input interface, signal output interface, power interface and signal generation & acquisition circuit.
Magnetostrictive level transducer for sewage disposal system, high precision, no temperature drift, anti-jamming performance, long life, high temperature resistance, corrosion resistance, high pressure resistant.