Non contact liquid level sensor with measuring range 2000mm is used for the liquid level preset and feedback, such as the liquid level of chemical containers. Magnetostrictive level sensors have effective travel 50mm~15000mm, can be used in most industrial automation systems.
Specification:
Basics | Model | CHN-MSL-2000 |
Measuring range | 0~2000 mm |
Shipping weight | 10.5 kg |
Length | 2199.3 mm |
Diameter | 50 mm |
Technical parameters | Linearity | ≤0.03%FS |
Repeatability | ≤0.003%FS |
Resolution ratio | ≤0.001%FS |
Hysteresis | ≤0.001%FS |
Working Voltage | 24V /12V DC |
Working current | Voltage /digital output type≤16mA; Current output type≤35mA |
Output method | 0~5V / 0~10V / 4~20mA / 0-20mA RS485 binary digital signal / SSI gray code signal |
Product type | Normal type; Explosion-proof type; Anti-corrosion type |
Measuring rod material | 0Cr18Ni9 (304) or 316L stainless steel (secial custom-made) |
Measuring rod diameter | Ф10mm |
Electronic bin material | 1Cr18Ni9 (304) |
304 and PTFE casing outside (Anti-corrosion type, special custom-made) |
1Cr18Ni9Ti and protection cover outside (Anti-corrosion type, special custom-made) |
Connecting screw thread | M18×1.5; M20×1.5; 3/4-16UNF |
Type of lead wire | PVC shielded cable; aviation plug (not applicable to explosion-proof type) |
Measuring rod pressure | 40MPa, 70MPa (Explosion-proof type) |
Temperature | T1: 0~+ 70℃, T2: -25~+80℃, T3: -40~+120℃ |
Buffer area | Front-end of buffer 50.8mm (electronic bin), the end of the buffer 63.5mm (the buffer area can be custom-made) |
Vibration | 100g, IEC standards 68-2-715g /10-2000Hz IEC standards 68-2-6 |
Protection Class | IP67 |
Explosion-proof level | Explosion-proof type: EXd II BT5 |
Installation diagram (unit: mm):

Tips: How to use magnetostrictive liquid level sensor in oil tank?
When the magnetostrictive liquid level sensor is used for the oil storage tank, it should be installed on the flange or threaded interface. The user should provide exact model or size of the two interfaces. Due to the height or air-tightness of the oil tube, it is necessary to install magnetostrictive transmitter for the users. Because the magnetostrictive liquid level sensor is separated from the digital panel meter. The user can choose to buy panel meter or not according to the actual demand. For some substances with less harm and no high requirements for the air-tightness, ordinary computer can be used to replace the digital panel meter. For devices such as oil tank, it is safe to use special panel meter. ATO digital panel meters is installing the corresponding software system, so that it can be used for display intensively (or display independently) and control on site.
Magnetostrictive liquid level sensor for chemical containers, high precision, no temperature drift, anti-jamming performance, long life, high temperature resistance, corrosion resistance, high pressure resistant.