Magnetostrictive level sensor with measuring range 300mm is used for the liquid level preset and feedback, such as the liquid level of brick molding machine hydro-cylinder. Magnetostrictive sensors also can be used in most industrial automation systems.
Specification:
Basics | Model | CHN-MSL-0300 |
Measuring range | 0~300 mm |
Shipping weight | 2 kg |
Length | 499.3 mm |
Diameter | 50 mm |
Technical parameters | Linearity | ≤0.03%FS |
Repeatability | ≤0.003%FS |
Resolution ratio | ≤0.001%FS |
Hysteresis | ≤0.001%FS |
Working Voltage | 24V /12V DC |
Working current | Voltage /digital output type≤16mA; Current output type≤35mA |
Output method | 0~5V / 0~10V / 4~20mA / 0-20mA RS485 binary digital signal / SSI gray code signal |
Product type | Normal type; Explosion-proof type; Anti-corrosion type |
Measuring rod material | 0Cr18Ni9 (304) or 316L stainless steel (secial custom-made) |
Measuring rod diameter | Ф10mm |
Electronic bin material | 1Cr18Ni9 (304) |
304 and PTFE casing outside (Anti-corrosion type, special custom-made) |
1Cr18Ni9Ti and protection cover outside (Anti-corrosion type, special custom-made) |
Connecting screw thread | M18×1.5; M20×1.5; 3/4-16UNF |
Type of lead wire | PVC shielded cable; aviation plug (not applicable to explosion-proof type) |
Measuring rod pressure | 40MPa, 70MPa (Explosion-proof type) |
Temperature | T1: 0~+ 70℃, T2: -25~+80℃, T3: -40~+120℃ |
Buffer area | Front-end of buffer 50.8mm (electronic bin), the end of the buffer 63.5mm (the buffer area can be custom-made) |
Vibration | 100g, IEC standards 68-2-715g /10-2000Hz IEC standards 68-2-6 |
Protection Class | IP67 |
Explosion-proof level | Explosion-proof type: EXd II BT5 |
Installation diagram (unit: mm):

Magnetostrictive sensor for brick molding machine, high precision, no temperature drift, anti-jamming performance, long life, high temperature resistance, corrosion resistance, high pressure resistant.