Close
Shopping Categories
Search

Circular Connector, 2/3/4/10/11/12/14 Pin, M19


$49.52
Circular connector has simple and firm locking mechanism, easy to seal, insert and dismantle. Circular connector has 2/3/4/5/
SKU: CHN-CIRCN-19M
Free Shipping Worldwide
Delivery date: 6-12 days

Circular connector has 2/3/4/5/6/7/8/9/10/11/12/14 pin to select.

Specification:

ModelCHN-CIRC-19M
Weight0.5kg
Coupling modeThreaded coupling
Shell materialZinc base alloys with nickel plate
Insert materialBakelite
Contact materialCopper (silver plating or gold plating)
TerminationSolder
Mating cycle500 times
Temperature range-20~+85℃
Cable diameter≤Φ9.5mm
Protection classIP55

Technology parameter:

Number of pins2345678910111214
Rated current/voltage35A-125V35A-250V35A-250V35A-150V16A-150V16A-150V10A-150V10A-150V10A-150V10A-150V10A-150V10A-150V
Operating voltageAC 250VAC 250VAC 250VAC 200VAC 200VAC 200VAC 200VAC 200VAC 200VAC 200VAC 200VAC 200V
Withstanding voltage (in 1 minute)AC 1500VAC 1500VAC 1500VAC 1000VAC 1000VAC 1000VAC 1000VAC 1000VAC 1000VAC 1000VAC 1000VAC 1000V
Insulation resistance at DC 500V (MΩ)150015001500150015001000100010001000100010001000
Contact resistance at 1A (MΩ)533333333333
Solder cup diameter Ф (mm)0.82221.20.80.80.80.80.80.80.8
Pin diameter Ф (mm)1.22.952.952.952.95221.51.51.51.51.5

Pin assignments:
Circular connector 2 to 14 pin m19 pin assignments
Dimensional drawing (unit: mm):

Circular connector 2 to 14 pin m19 dimensional drawing
Note: Dust cap is not in the packing list.
Tips: Termination way of circular connector
Termination way refers to the connection way between the contact pair of electrical connector and wire or cable.
Solder termination: Wire is welded in the solder cup of contact.
Crimp termination: Wire is crimped inside the crimping cylinder of contact, which can be separated from circular connector by contact withdrawal tool. The dismountable contact can both plug in the front end and back end of circular connector. Dismountable contact in the back end is suggested.
The use environment and requirements for field repair are considered in the choice of termination way.