Send Inquiry

60 hp (45 kW) VFD, 3 Phase 240V, 380V, 480V

$2193.10

Affordable 60 hp (45 kW) VFD, three phase 240V, 380V, 480V energy saving variable frequency drive with high performance, bran

SKU: GK3000-4T0450G

Free Shipping Worldwide

Delivery date: 6-12 days

Overview
Documents

60 hp (45 kW) high quality variable frequency drive, three phase 240V, 380V, 480V for selection, IP20.

Specification:

Basics	Model	GK3000-4T0450G/ GK3000-2T0450G
	Capacity	60 hp (45 kW)
	Shipping weight	31 kg
	Dimension	555310260 mm
I/O Feature	Rated current	91 A
	Input voltage	3 phase 240V /380V /480V AC ±15% (Optional)
	Input frequency	50Hz/ 60Hz
	Output voltage	3 phase AC 0~input voltage
	Output frequency	0.00~400.00Hz
	Over load capacity	150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control Feature	Control mode	V/F control; Sensorless vector control;
	Communication	RS485
	Speed regulation	1:100
	Start torque	150% of rating torque at 1 Hz
	Speed control accuracy	≤±0.5% of rating synchronous speed
	Frequency precision	Digital setting: max frequency x± 0.01%; Analog setting: max frequency x± 0.2%
	Frequency resolution	Analog setting: 0.1% of max frequency; Digital setting: 0.01Hz
	Torque boost	Automatic torque boost, manual torque boost 0.1%~30.0%
	Interior PID controller	Be convenient to make closed-loop system
	Automatic energy save running	Optimize V/F curve automatically based on the load to realize power save running
	Automatic voltage regulation (AVR)	Can keep constant output voltage when power source voltage varies.
	Automatic current limiting	Limit running current automatically to avoid frequent over-current which will cause trip
Environment	Enclosure rating	IP 20
	Temperature	–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
	Humidity	5%-95%, without condensation
	Altitude	≤1000m; VFD will be derated if above 1000m
	Impingement and oscillation	Normal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
	Store environment	–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Tips: Variable frequency drive storage notifications
If the VFD is not used for long periods of time, it may be damaged, which is caused by the environmental conditions that do not meet the storage conditions of the VFD. Therefore, the VFD should be placed in the packing case when stored, and note the following:

It is the best to store in absence of sun, no dust and dry place.
The ambient temperature is best in the range of -20~40℃.
The relative humidity is best in the range of 20% to 90%, without condensation.
Avoid long-term storage in corrosive gases and liquids environment.
Long term storage (2-3 years) will lead to electrolytic capacitor degradation. Adding voltage can self-repair certain degree of deterioration. In long-term storage, it should be regularly (within 6 months) powered on for at least 5 hours, and the input voltage should be gradually raised to the rated value by voltage regulator. If the storage period is more than 10 years, the electrolytic capacitors rubber sealed will lose efficacy and must be replaced.

60 hp (45 kW) VFD, 3 Phase 240V, 380V, 480V

300 hp (220 kW) VFD, 3 Phase 240V, 415V, 460V

200 hp (160 kW) VFD, 3 Phase 240V, 420V, 480V

150 hp (110 kW) VFD, 3 Phase 230V, 400V, 480V

125 hp (90 kW) VFD, 3 Phase 220V, 415V, 480V

100 hp (75 kW) VFD, 3 Phase 230V, 400V, 460V