20 hp (15 kW) variable frequency drive at fair price, converts 1-phase 220V to 3-phase 380V for AC motor speed control, to realize high precision and wide speed regulating range and high performance.
Specification:
Basics | Model | GK3000-CS0150G |
Capacity | 20 hp (15 kW) |
Shipping weight | 22 kg |
Dimension | 530*320*235 mm |
I/O Feature | Rated current | 32 A |
Input voltage | 1 phase 220~240V AC |
Input frequency | 50Hz/ 60Hz |
Output voltage (Optional) | 3 phase AC 380V/ 400V/ 415V/ 440V/ 460V (Note: 440V, 460V output voltage only for the 1-phase 240V input VFD) |
Output frequency | 0.00~400.00Hz |
Over load capacity | 150% of rated current for 1 minute, 180% of rated current for 3 seconds |
Control Feature | Control mode | V/F control; Sensorless vector control; |
Communication | RS485 |
Speed regulation | 1:100 |
Start torque | 150% of rating torque at 1 Hz |
Speed control accuracy | ≤±0.5% of rating synchronous speed |
Frequency precision | Digital setting: max frequency x± 0.01%; Analog setting: max frequency x± 0.2% |
Frequency resolution | Analog setting: 0.1% of max frequency; Digital setting: 0.01Hz |
Torque boost | Automatic torque boost, manual torque boost 0.1%~30.0% |
Interior PID controller | Be convenient to make closed-loop system |
Automatic energy save running | Optimize V/F curve automatically based on the load to realize power save running |
Automatic voltage regulation (AVR) | Can keep constant output voltage when power source voltage varies. |
Automatic current limiting | Limit running current automatically to avoid frequent over-current which will cause trip |
Environment | Enclosure rating | IP 20 |
Temperature | –10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5% |
Humidity | 5%-95%, without condensation |
Altitude | ≤1000m; VFD will be derated if above 1000m |
Impingement and oscillation | Normal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g) |
Store environment | –20℃~ +60℃; no dust, no corrosive gas, no direct sunlight |
Tips: Universal VFD vs. single phase to three phase VFD
Universal VFD is a power control device that applies the principle of frequency conversion technology and microelectronics technology to control AC motor by changing the frequency of motor working power supply, converting AC power with fixed voltage and frequency into AC power with variable voltage or frequency. The process is to convert the frequency AC power into DC power through rectifier, and then convert the DC power into AC power with controllable frequency and voltage to supply the motor.
The single phase to three phase variable frequency drive is based on the ordinary VFD, which converts the 220V AC power into DC power through the rectifier (voltage doubling rectifier), and then converts the DC power into three-phase 380V AC power with controllable frequency and voltage to supply the motor. This method does not step up the voltage through the transformer, but only through the rectifier boost circuit, which greatly reduces the size and weight of the VFD, and the cost is lower compared to the boost device.
Low cost 20 hp VFD for sale, with 32 amps, single phase 220 volt -240 volt input, 380 volt three phase output. This 15 kW variable frequency drive built-in RS485 interface, controlled by V/F, vector control mode.