Send Inquiry

10 hp VFD, 1-Phase 220V to 3-Phase 380V VFD

$1095.67

Affordable price 10 hp (7.5 kW) VFD, converts 220v/ 230v /240v 1 phase input to 380v/ 400v/ 415v 3 phase output, 17 amps, V/F

SKU: GK3000-CS0075G

Free Shipping Worldwide

Delivery date: 6-12 days

Overview
Documents

Customized single phase 220 volt to three phase 380 volt VFD, 10 hp variable frequency drive for AC motor speed control at 50Hz/ 60Hz input frequency.

Specification:

Basics	Model	GK3000-CS0075G
	Capacity	10 hp (7.5 kW)
	Shipping weight	8 kg
	Dimension	330200200 mm
I/O Feature	Rated current	17 A
	Input voltage	1 phase 220~240V AC
	Input frequency	50Hz/ 60Hz
	Output voltage (Optional)	3 phase AC 380V/ 400V/ 415V/ 440V/ 460V (Note: 440V, 460V output voltage only for the 1-phase 240V input VFD)
	Output frequency	0.00~400.00Hz
	Over load capacity	150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control Feature	Control mode	V/F control; Sensorless vector control;
	Communication	RS485
	Speed regulation	1:100
	Start torque	150% of rating torque at 1 Hz
	Speed control accuracy	≤±0.5% of rating synchronous speed
	Frequency precision	Digital setting: max frequency x± 0.01%; Analog setting: max frequency x± 0.2%
	Frequency resolution	Analog setting: 0.1% of max frequency; Digital setting: 0.01Hz
	Torque boost	Automatic torque boost, manual torque boost 0.1%~30.0%
	Interior PID controller	Be convenient to make closed-loop system
	Automatic energy save running	Optimize V/F curve automatically based on the load to realize power save running
	Automatic voltage regulation (AVR)	Can keep constant output voltage when power source voltage varies.
	Automatic current limiting	Limit running current automatically to avoid frequent over-current which will cause trip
Environment	Enclosure rating	IP 20
	Temperature	–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
	Humidity	5%-95%, without condensation
	Altitude	≤1000m; VFD will be derated if above 1000m
	Impingement and oscillation	Normal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
	Store environment	–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Tips: 1-phase 220V to 3-phase 380V VFD working principle

The principle of variable frequency drive is a power control device that applies the principle of frequency conversion technology and microelectronics technology to control AC motors by changing the working frequency of the motor.

The output waveform of VFD is simulated sine wave, mainly used in 3-phase asynchronous motor speed regulation, also called frequency converter. The VFD is mainly composed of rectifier (AC to DC), filter, VFD (DC to AC), brake unit, drive unit, detection unit and microprocessor unit. The VFD mainly adopts the AC-DC mode (VVVF frequency conversion or vector control frequency conversion), which first converts the frequency AC power into DC power through the rectifier, and then converts the DC power into AC power with controllable frequency and voltage to supply the motor.

The single phase 220 volt to three phase 380 volt VFD converts the 220V AC power supply into DC power supply through rectifier (voltage doubling rectifier), and then converts the DC power supply into 3-phase 380V AC power supply with controllable frequency and voltage to supply the motor.

10 hp VFD, 1-Phase 220V to 3-Phase 380V VFD

5 hp VFD, 1-Phase 220V to 3-Phase 380V VFD

30 hp VFD, 1-Phase 220V to 3-Phase 380V VFD

25 hp VFD, 1-Phase 220V to 3-Phase 380V VFD

20 hp VFD, 1-Phase 220V to 3-Phase 380V VFD

15 hp VFD, 1-Phase 220V to 3-Phase 380V VFD