High precision variable linear DC power supply for use in scientific research, product development, laboratories, schools and electronic production lines. It supplies 0 to 60V DC at up to 50A. Output voltage and current are adjustable and displayed on a 3 digit LED display.
Specification
Model | CHN-JK6050S |
Input Voltage | 110V or 220V AC (+/- 10%) |
Output Voltage Range | 0-60V |
Output Current Range | 0-50A |
Output Power | 3000W |
Frequency | 50Hz/60Hz |
Output Type | Dual |
Display | 3 digit |
Display Accuracy | ≤ ±0.1%+2d |
Voltage Display Resolution | 100mV |
Current Display Resolution | 100mA |
Efficiency | >65% |
Voltage Regulation |
Load Regulation (CV) | 1×10-5+8mV |
Line Regulation (CV) | 1×10-5+3mV |
Ripple & Noise (P-P) | 0.5mV |
Temperature Coefficient | 300PPm/℃ |
Current Regulation |
Load Regulation (CC) | ≤5mA |
Line Regulation (CC) | 2×10-5+3mA |
Temperature Coefficient | 500PPm/℃ |
Others |
Protection | Over Load and Over Voltage Protection |
Recovery Time | ≤100µs |
Operating Ambient | 0℃ to + 40℃/ 85%RH |
Storage Ambient | -10℃ to + 80℃/ 80%RH |
Certification | CE, RoSH |
Warranty | 12 Months |
Size | 480 (W) x 520 (H) x 700 (D) mm |
Weight | 100kg |
Package List | 1 x DC Power Supply Host, 1 x Output Power Cord, 1 x User Manual |
Tips: Difference between Linear DC power supply and switching power supply
- The linear power supply has many advantages of good accuracy, small ripple, good adjustment rate and low external interference. It is suitable for many occasions.
- The size of the switching power supply is smaller than the linear power supply, but the switching power supply has the problem of pollution to the power grid and radiation interference.
- The switching power supply is not suitable for continuous and adjustable occasions with 0 volt starting when outputting high voltage and large current, but it is suitable for occasions where fixed output or relatively fixed output does not require much radiation interference.
- The linear power supply is relatively easy to maintain. However, the switching power supply has a certain degree of difficulty in maintenance due to its dense components. In addition, because the circuit is completely different from the linear power supply, the technical quality of the maintenance personnel is relatively high, and the working state of each point of the circuit can be observed with an oscilloscope.
High efficiency 0 to 50 amp, 0 to 60 volt variable linear DC power supply is switching mode with 3000W DC output. Output voltage and current are continuously adjustable at nominal value, with constant voltage (CV) / constant current (CC) output precision.