Send Inquiry

15V DC 10A 300W Switching Power Supply

$98.39

Factory price switching power supply transforms the full range of AC input to a stable DC voltage of 15V at the rated power 3

SKU: CHN-SMPS-300-1015

Free Shipping Worldwide

Delivery date: 6-12 days

Overview
Documents

ATO switching power supply incorporates a switching regulator in order to be highly efficient in the conversion of electrical power.

Features

Universal AC input / Full range AC input
Short circuit, overload and overvoltage protections
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
High reliability, low price and wide range of applications

Specification

Model		CHN-HF300D-ML
Output	DC Voltage	15V
	Rated Current	10A
	Current Range	0.5 ~ 10A
	Rated Power	300W
	Ripple & Noise (Max.)(Note 2)	120mVp-p
	Voltage Adjust Range	Rated voltage ±5%
	Voltage Tolerance (Note 3)	±1.0%
	Line Regulation	±0.5%
	Load Regulation	±0.5%
	Setup, Rise, Holdup Time	200ms, 100ms, 30ms
Input	Voltage Range	170V~264VAC 210 ~ 370VDC
	Frequency Range	47~63Hz
	Efficiency (Typ.)	85%
	AC Current (Typ.)	1.3A/115V AC 0.65A/230V AC
	Inrush Current (Typ.)	Cold start: 60A/230V AC
	Leakage Current	<1mA/230V AC
Protection	Overload	105~150% rated output power Protection type: Hiccup mode, recovers automatically after fault condition is removed.
Environment	Working Temperature	-10 ~ +60℃
	Working Humidity	20~90% RH non-condensing
	Storage Temperature	-20~+85℃
	Storage Humidity	10~95% RH non-condensing
	Temperature Coefficient	±0.03%/℃ (0~50℃)
	Vibration	10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)	Safety Standards	UL1012 Approved
	Withstand Voltage	I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
	EMC Emission	Compliance to FCC Part15 Jconduction Class B
Others	MTBF	≥408.3K hrs MIN. MIL-HDBK-217F (25℃)
	Dimension	1999850mm (LWH)
	Weight	0.51kg
Note	1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance includes set up tolerance, line regulation and load regulation. 4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Installation Dimension (Unit: mm)

SMPS Power Supply Applications

Power Tools
Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
Offices Devices
Computer, Printer, LCD Monitor, Scanning Machine, etc.
Electrics & Household Appliance
TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge / Freezr, Coffemarker, etc.
Industrial Equipemnt
Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: What is the voltage regulation test in switching power supply?

Line regulation test, which means the rate of change of the output voltage with the input AC voltage when the power supply has a certain load. What is investigated is that when the input AC grid voltage varies within a certain range, the output voltage of the power supply cannot have too much jump. Generally set at ±2%-±5%.

15V DC 10A 300W Switching Power Supply

24V DC 5A 120W Switching Power Supply

24V DC 2.5A 60W Switching Power Supply

24V DC 2A 48W Switching Power Supply

24V DC 1.5A 36W Switching Power Supply

24V DC 16.6A 400W Switching Power Supply