100A DC Reversing Contactor, 2 pole, 12V/24V/48V

ATO ADC100 reversing contactor is used to change the direction of rotation in alternating current motors, start them gently and to monitor their load. Widely used in auto electric winch, telecommunication equiment, engineering machinery and other electric control system.

Features

• 100 amps rated load current of contact circuit.
• DPST-NO, DPST-NC contact form.
• 12V, 24V, 48V DC coil rated voltage for selection.
• Main contact voltage drop at 100A, not above 80mV.
• Mechanical life up to 300 thousand times.

Specifications

DC Reversing Contactor Circuit Diagram

Installation Diagram (Unit: mm)

Tips: DC contactor working principle

When the contactor coil powers on, the coil current generates a magnetic field, which makes the static iron core to produce magnetic adhesion and then suck the moving iron core, thus driving the movable contact to move. Normally closed contact disconnects and normally open contact closes, the two are linked. When the coil powers on, magnetic adhesion disappears, the armature releases under the effect of retracting spring, thus restoring the contact: Normally open contact disconnects while the normally closed contact closes.
DC contactor should be used in the DC power loop, such as the DC oil pump. This motor is used to guarantee the oil supply of turbine system at the time of power outage, both of its main circuit and auxiliary circuit are DC, so is the contactor.