Factory price pedal switch with 1NO1NC contact, CMV-100D micro switch type. It has advantages of light weight, simple operation and long service life.

Specification

NOTE: The default size of conduit connector is M20x1.5, outfiting cable connector. Conduit connector size is PG13.5, with product model number plus (-P), example: CFS-302-P.

Dimension (unit=mm) 

Tips: How to Install Foot Switch?

1. The operation circuit is turned on and off by stepping on or stepping on it, and it can also be used to control the switch of the output current. The internal structure of the foot switch is a set of normally open and normally closed. In a 250V circuit, to control a three-phase motor, an AC contactor must be used. The normally open two ends of the foot switch are stringed in the AC contactor coil control loop.

2. The foot switch has three lines, one control line is normally open, one control line is normally closed, and the other is a common line of normally open and normally closed. We only use one control line which is normally open. One is normally open and the other one is normally closed.

3. An AC contactor must be used, and the normally open two ends of the foot switch are in series in the AC contactor coil control loop.