20w All-in-one Portable Fiber Laser Marking Machine

Fiber laser marking system features:

• Marks widest variety of materials, including steel, titanium, aluminum, copper, ceramics and some plastics.
• 100,000+ hours of laser life, reducing costs and production downtime.
• 110mm² mark field (other sizes available).
• No consumables and minimal maintenance help reduce operating costs.
• Air-cooled 10W-20W models.
• Higher beam quality than flash lamp, diode pumped and vanadate, resulting in a high quality mark.

Material: Plastic, steel, stainless steel, magal, zinc alloy, copper, nickeling, zincing, alox.

Tips: Operation cautions of laser marking machine

1. Before marking, test on scrap first. Mark bulk product after no error is found. Before marking codes, check the code carefully, for fear of any mistake.
2. Make sure that the fiber laser marking machine is started up and shut down normally. Avoid sudden power lost or direct power off. The general order is as below: Turn on the power, start up the machine, work normally, shut down, and turn off the power.
3. Before starting up the laser marking machine, take down the protective cover of the laser head. When starting up the machine, don't put any object under the laser head, for fear that the laser light will break the object.
4. Be careful when using the machine, in case of being injured. When marking, don't put your hand under the laser light to prevent being hurt.
5. After use, turn off the computer and the laser marking machine. Cover the machine up.