Good price RS-232/ RS-485 to RS-485 hub with 2-ports, RS-232 ±15KV ESD protection, RS-485 each wire 600W lightning surge protection, 300bps-115.2kbps baud rate.
Specification
Model | UT-5202 |
Standards | RS-232C, RS-485 EIA/ TIA |
Interface | RS-232C: 10-pin terminal block; RS-485: 10-pin terminal block |
Transmission media | Twisted-pair or shielded wire |
Working mode | Asynchronous half-duplex |
Operating power | 9-30VDC/ 150mA |
Isolation | 2500VRMS/ 500DC continuous isolated vlotage, DC/ DC module |
Baud rate | 300bps-115.2kbps |
Protection | RS-232 ±15KV ESD protection, RS-485 each wire 600W lightning surge protection |
Transmission distance | 0-5000m (115200-300bps) |
Dimension | 120mm*80mm*25mm |
Operating temperature | -40℃ to 85℃ |
Relative humidity | 5% to 95% |
Certificates | RoHS, CE, FC |
Warranty | 12 months |
Dimension (mm/ inch)

Tips: What is a Hub?
A hub is a device that connects multiple Ethernet twisted pairs or optical fibers together under the same physical medium. The hub is the physical layer operating in the OSI model. It can be regarded as a multi-port repeater, if it detects a collision, it will submit a blocking signal.
Since the hub will regenerate or amplify any digital signal received, and then submit it from all ports of the hub, this will cause a great chance of collision between signals, and the signal may also be eavesdropped, and this means that all connected to the hub All of the devices belong to the same collision domain name and broadcast domain name, so most hubs have been replaced by switches.
RS-232/ RS-485 to RS-485 hub at affordable price, which with two ports, twisted-pair/ shielded wire transmission media, 9-30VDC/ 150mA operating power, asynchronous half-duplex working mode. It is widely used in highway toll systems, road monitoring systems and power acquisition systems.