Portable Ozone (O3) Gas Detector, 0 to 10/20/50 ppm

Portable O₃ gas detector with alarm is suitable to monitor the Ozone concentration in range of 0 to 10/20/50/100ppm with high precision sensor and economical price.

Features

• LCD dot matrix display, direct readout of gas type, unit, concentration, local time, etc.
• Support English/Chinese operation, easy to shift.
• Gas concentration unit PPM and mg/m³ can be shift quickly.
• Built-in micro-sampling pump, 10 grades of suction are available.
• Explosion-proof certification

Gas Detector Functions

• With self-calibration and zero calibration functions, makes the detection more accurate and reliable.
• One key to restore factory setting, free from maloperation.
• With temperature and pressure compensation, able to realize the compensation for the gas concentration under different temperature and pressure environments.
• Two-stage alarm with sound and light, and alarm point is settable.
• Rechargeable lithiumpolymer battery with large capacity.
• High-strength special engineering plastic housing, with anti-slip, waterproof, dustproof and explosion-proof.

Specification

Note:
* If you need a O3 gas detector with other measuring ranges unlisted in above table, please contact us to inform your operating environment, so as to help you choose an appropriate one for your application.
* We also provide other common gas detectors, and you can refer to ATO Gas Detector Catalog to get the specific gas type and measurement range. If you have any questions, please feel free to contact us.

Applications

Handheld Ozone gas detector is widely used for O3 gas measurement in the clean area, pharmaceutical factory, food factory, cosmetics factory, laboratory and so on.

Tips: Use Case - Ozone (O3) Detector in Pharmaceutical Factory

A pharmaceutical factory, specializing in research, production and sales of various chemical API, requires testing whether ozone disinfection in the workshop reaches the effect of sterilization.

Separate sterilization is required in the workshop of pharmaceutical plant. Ozone generator with a certain concentration, which is selected according to the size of the room space, is directly installed in the room. And the disinfection time is also set as required. The ozone generator will automatically shut down after the disinfection finishes. Then, it need to check whether the room disinfection has achieved the effect. The pharmacy manager said that there is a hundred-level workshop, and about 20ppm ozone concentration can achieve the standard for disinfection. In additions, there are no workers in the room to monitor ozone levels during disinfection.

According to the requirements of the manager of the pharmaceutical factory, the ozone concentration is not up to the standard until it reaches 20ppm. The ozone (O₃) gas detector CHN-GAS-O3 is recommended, with measuring range of 0-50ppm and data storage and export functions. In this way, the ozone detector can be set the storage interval, such as 5 seconds to store a data. Before disinfection, put the detector in the disinfected room. After disinfection, take out the O₃ detector and export the data to an Excel sheet in the computer via USB. Thus, the data can also be printed out for checking. This model of ozone gas detector has a sampling pump inside, which will draw the gas into the instrument for detection. The gas detector has fast response and high accuracy. Because ozone is toxic, it is better to choose pump suction type to avoid ozone poisoning.