Digital clamp meter has AC current range 0-600A, TRMS/NCV/temperature/capacitance functions, maximum jaw opening size 36mm, 4 digit display and maximum value 5999.
Specification:
Basics | Model | CHN-UA2018B |
Weight | 530g |
Size (L*W*H) | 210*78*35mm |
Display | 4 digit LCD display |
Maximum display value | 5999 |
Power supply | DC 4.5V, 3 AAA batteries |
Maximum jaw opening size | 36mm |
Woring environment | Temperature: 18℃~28℃ (64.4℉~82.4℉), relative humidity:<75% |
Storage temperature | -10℃~+50℃ (14℉~122℉) |
Accessories | A pair of test probes, a pair of temperature probes, a user manual, 3 AAA batteries |
Functions | Item | Range | Accuracy |
AC current | 600A | ±(3.0%+10 digits) |
Inrush current | 600A | ±(5.0%+60 digits) |
DC voltage | 600V | ±(0.8%+5 digits) |
AC voltage | 600V | ±(1.5%+10 digits) |
Resistance | 20MΩ | ±(1.2%+3 digits) |
Frequency | 100kHz | ±(3.0%+10 digits) |
Capacitance | 100mF | ±(4.0%+3 digits) |
Temperature | -40℃~+1000℃ (-40℉~1832℉) | ±(1.0%+3 digits) |
Duty ratio | 0.1%~99.9% | ±(3.0%+3 digits) |
Special functions | TRMS | True RMS measurement for sine wave signal |
NCV | Non-contact voltage test, with buzzer and indicator |
Diode test | Display forward voltage value of diode |
On-off buzzer | Continuity test buzzer |
Data hold | Hold the reading when taking a measurement |
Automatic power off | Automatic power off when 15 minutes no operation |
Overload protection | Overload protection for 100% range |
Range selection | Automatic range selection and manual range selection |
Back light | Back light for LCD display |
Inspection light | Inspection light for clamp operation |
LED torch | A LED torch for night lighting |
Tips: How to measure the temperature by using a clamp meter?
Do not enter a voltage higher than 60V DC or 30V AC in temperature measurement function to avoid human body damage or clamp meter damage.
- Turn the switch to the temperature measurement position and select (press 'SEL') Celsius or Fahrenheit as required.
- Connect the negative terminal (black) and the positive terminal (red) of the K type thermocouple to the COM input jack and temperature input jack separately.
- The other end of the thermocouple (test side) close to the surface of the measured object.
- The measured temperature value will be read by the LCD display.
Note: The highest measurement temperature of K-type thermocouple in accessory is 250 ℃ (482℉).
Clamp meter with TRMS/NCV/LED torch functions has the measuring range of AC current 0-600A, AC/DC voltage 0-600V, resistance 0-20MΩ, frequency 0-100kHz, capacitance 0-100mF, temperature -40℃~+1000℃ (-40℉~1832℉) and duty ratio 0.1%~99.9%. The maximum jaw opening size is 36mm.