Digital clamp meter has AC current range 0-600A, TRMS function, maximum jaw opening size 28mm, 4 digit display and maximum value 1999.
Specification:
Basics | Model | CHN-UA3268A |
Weight | 160g |
Size (L*W*H) | 185*51*25mm |
Display | 4 digit LCD display |
Maximum display value | 1999 |
Power supply | DC 3V, 2 AAA batteries |
Maximum jaw opening size | 28mm |
Woring environment | Temperature: 5℃~35℃ (41℉~95℉), relative humidity:<75% |
Storage temperature | -10℃~+50℃ (14℉~122℉) |
Accessories | A pair of test probes, a user manual, 2 AAA batteries |
Functions | Item | Range | Accuracy |
AC current | 600A | ±(2.5%+5 digits) |
DC voltage | 600V | ±(1.0%+5 digits) |
AC voltage | 600V | ±(1.5%+5 digits) |
Resistance | 2MΩ | ±(1.0%+4 digits) |
Special functions | TRMS | True RMS measurement for sine wave signal |
Diode test | Display forward voltage value of diode |
On-off buzzer | Continuity test buzzer |
Data hold | Hold the reading when taking a measurement |
Automatic power off | Automatic power off when 15 minutes no operation |
Overload protection | Overload protection for 100% range |
Range selection | Manual range selection |
Backlight | Backlight for LCD display |
Tips: True RMS zero input characteristics of clamp meter
To test sine wave signal measurement, the True RMS measurement method makes less error than traditional way of average response.
The True RMS clamp meter measures the sine wave accurately, but it may display a reading between 1 and 50 when the measured signal is not being input (select the ac voltage function, the input short circuit) for the AC function. These deviation readings are normal. They do not affect the clamp meter's accuracy of measuring AC power within the specified measurement range.
True RMS values require the input signal to reach a certain level for measurement. Therefore, the AC voltage and current ranges are specified between 2% and 100% of full range.
The mini clamp meter is a basic True-RMS clamp meter with AC current range 0-600A, AC/DC voltage range 0-600V, resistance range 0-2MΩ and maximum jaw opening size 28mm. Digital mini clamp meter also has special functions of diode test, on-off buzzer, data hold, automatic power off, overload protection, manual range selection and white backlight.