DC line reactor for vfd at affordable price, 3 hp power rating, 1 phase, improve the input current wave caused by capacitor harmonics, small size and light weight. In addition to improve the power factor, the DC reactor can also reduce the impact immediately after the power is turned on.
Specification:
Model | CHN-DCL-10 |
Phase | 1 Phase |
Power Adapter | 2.2 kW (3 hp) |
VFD Voltage Adapter | 220V-1200V (Contact us for other voltages) |
Rated Current | 10A |
Pressure Drop | 6.37 |
Insulation Grade | F.H |
Dimension | 100*120*85mm (L*W*H) |
Mounting Dimension | 84*70mm |
Electric Strength | Iron core-winding 3000VAC/50Hz/10mA/60s no arcing no breakdown |
Insulation Resistance | iron core-winding 1000VDC, Insulation resistance ≥100MV |
Noise of Reactor | Less than 35dB (measured from 1 meter away in horizon from reactor) |
Degree of Protection | IP00 |
Degree of Insulation | > Class F |
Weight | 2.5kg |
Features
1. Improve the input current wave caused by capacitor harmonics.
2. Reduce and prevent rectifier bridge damage and capacitors.
3. Overheating due to a surge in current.
4. Improve the power factor and reduce the AC pulse of the DC bus.
5. Limit transient changes in system voltage.
Dimension (unit: mm)

Tips:
In the lifting industry, since AC reactors cannot be omitted, the harmonic reduction effect of AC reactors is basically the same as that of DC reactors.
At the same time, using AC and DC reactors can reduce harmonic interference better, but it also increases the voltage loss on the motor side (there are 1% to 3% voltage drops on AC and DC reactors). Therefore, ATO recommends replacing AC reactors with AC reactors.
3 hp (2.2 kW) single phase VFD reactor for sale, DC smoothing reactor in high voltage DC transmission (HVDC), rated current 10A, 220V-1200V voltage can be customized.