10 hp vfd line reactor rated current 20 Amps, 3 phase input, voltage 220V, 240V, 415V and 480V are available, widely used in various power supply sites.
10 hp Input Line Reactor Specifications
Basic | Model | ATOACR-0020-0M70-0.4SC |
Recommended VFD Model | GK3000-4T0075G (10 hp three phase VFD)
|
Phase | 3 Phase |
Power | 10 hp (7.5 kW) |
Weight | 4 kg |
Technical Parameters | Work Valtage | 380V (optional: 220V/ 240V/ 400V/ 415V/ 440V/ 460V/ 480V) |
Work Frequency | 50Hz/60 Hz |
Rated Current | 20 A |
Max Current | 1.5 Times the Rated Current, Continued 60s |
Inductance Value | 0.7 mH |
Material | Aluminium/Copper (Optional) |
Voltage Drop | 2% |
Noise | ≤65dB |
Insulation Class | Class F, H |
Protection Class | IP00-IP22 |
Insulation Resistor | ≥100MΩ |
Working Environment | Operation Environment | -10℃~+45℃ |
Temperature Rise | ≤85K |
Humidity | ≤90%RH, without condensation |
Running Ambient Temperature | -25℃~+45℃ |
Altittude | ≤2000m |
10 hp Input Line Reactor Size & Circuit Diagram


Dimension (±5mm) |
L | D | W | W1 | H | A×B |
155mm | 95mm | 80mm | 61mm | 170mm | 6×15 |
Tips: The wiring of reactor is divided into two ways, series and parallel
- Half-core dry shunt reactor: In the ultra-high voltage long-distance transmission system, it is connected to the tertiary coil of the transformer. It is used to compensate the capacitive charging current of the line, limit the system voltage rise and operate the over voltage, and ensure the reliable operation of the line.
- Half-core dry series reactor: Installed in the capacitor circuit, when the capacitor circuit is put in, it will close the inrush current and suppress the harmonics.
5 kW (10hp) AC line reactor for connecting to the load side of the inverter, 20A rated current, 3 phase input, voltage 380 volt, input vfd line reactor with long life span and high efficiency, low cost and brand new.