60 kVA Voltage Stabilizer Features

• Input: Three phase and four-line system, 175V-265V (phase voltage), 304V-456V (line voltage)
• Output: Three phase 380V, other voltages can be customized
• High technology with computer programming control
• Comes with seek, compact and elegant design
• Perfect protection function: Over/ low voltage protection, over heat/ load protection, short circuit protection
• High efficiency: More than 95%

60 kVA 3 phase Industrial AC Automatic Voltage Stabilizer is a adjustable automatic voltage compensation high-power regulating power device. When voltage from supply network is varied or due to loading current effect, it automatically regulates the output voltage to ensure the normal function of the varied of electric equipments.

60 kVA Voltage Stabilizer Specifications

Model Number		CHN-SBW/ZBW-60K
Capacity		60 kVA (The power capacity of voltage stabilizer needs to be 1.5~2 times greater than the load power)
		User Manual for 30kVA-3000kVA 3-phase voltage stabilizer
Phase		3 Phase 4-line
Input Voltage Range		±15% tolerance for all standard output voltages above 380V. ±20% tolerance for required 380V output and all standard voltages below.
Output Voltage		3 phase 380V (Optional: 110V/ 120V/ 208V/ 220V/ 230V/ 240V/ 400V/ 415V/ 440V/ 460V/ 480V)
Output Accuracy		±2~4%/ ±1% (Optional) * In case of output accuracy of +/- 2-4%, the voltage stabilizer will be servomotor based, and in case of output accuracy of +/- 1%, the voltage stabilizer would be SCR based.
Frequency		50Hz/60Hz
Current Type		AC
Efficiency		≥95%
Response Time		≤1.5S
Ambient Temperature		-15°C~+40°C
Cooling Method		Naturally air cooled
Insulation Resistance		≥5MΩ
Electricalintensity		Without breakdown and flashover phenomena at power frequency sine voltage 2000V for 1 min
Overload Capacity		Overload current (%)		Duration (min)
		20		≤60
		40		≤15
		60		≤5
Waveform Distortion		Non-lack fidelity waveform
Protection		Over-voltage, over-current, feed phases
Protection Grade		IP 24
Warranty		24 months
Certificate		ISO9001:2008, CE
Weight		370 Kg
Package Size		800x620x1350 mm

3 Phase Voltage Stabilizer Schematic Diagram

Industrial Voltage Stabilizer Inner Detail

Tips for Installing Voltage Stabilizer

1. Check the housing, ammeter, switch, indicator lamp, button and wiring terminals of voltage stabilizer.
2. Connect the voltage stabilizer input terminal to switch board and install a suitable fuse on the switch board, so as to ensure electrical safety.
3. Connect the power supply of power consumption equipment to the output terminal of this instrument, notice that the rated input voltage of electrical appliances should be consistent with that of the voltage stabilizer, don't connect wrongly.
4. Turn on the power switch of the voltage stabilizer first and the indicator light works, observe if the indicated value of voltmeter is normal. If the output voltage is normal, turn on the power switch of the power consumption equipment, the voltage stabilizer can adjust voltage automatically.
5. If the power consumption equipment would be free for a long term, please turn off its power switch to reduce power consumption and extend the service life of the voltage stabilizer.
6. The voltage stabilizer should not be overloaded. When the market voltage is low and the output capacity reduces, please reduce the load of the voltage stabilizer.