Close
Shopping Categories
Search

Solid state relay SSR-40DA, 40A 3-32V DC to AC


$57.56
Brand new solid state relay 40A, zero cross, control voltage 3-32V DC, load voltage 24-480V AC, LED indicator, panel mount, l
SKU: CHN-SSR-DH40DA
Free Shipping Worldwide
Delivery date: 6-12 days

Features

40 amps solid state relay (SSR) features high structural strength, good impact resistance, and strong shock resistance. The SSR offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Built in RC absorption
  • Photoelectric isolation
  • SCR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelCHN-SYDH4048ZD3
InputControl voltage range3-32V DC
Max. input current12mA
Must operate voltage2.8V DC
Must release voltage1.5V DC
OutputLoad voltage range24-480V AC
Peak voltage800V AC
Maximum load current40A
Maximum off-state leakage current2mA
Maximum off-state time10mS
Maximum on-state voltage drop1.5V
GeneralTypeDC to AC, single phase
Dimension L – W – H (mm)57.4х44.8х28
Weight135g
Dielectric strength (input to output)4000V
Dielectric strength (input, output to the base)2500V
Operating temperature-20℃~ 80℃
MountPanel
CertificationCE

Note:

  1. When the load is a resistive load, the maximum load current of the selected SSR should be 2~3 times greater than the actual load current;
  2. When the load is an inductive load, the maximum load current of the selected SSR should be more than 7~8 times the actual load current.
  3. When the maximum load current is higher than 10A, a heat sink must be installed to the solid state relay, or the SSR relay should be mounted on a metal base plate with heat dissipation effect, and the thermal grease is applied between them.

Dimension (Unit: mm)

Single Phase SSR Dimensions

Wiring Diagram

Single Phase DC to AC SSR Wiring Diagram

Tips: Solid state relay has advantages over EMR relay

Solid state relay (SSR) is a new type of non-contact switch composed of solid state electronic components, and achieve the purpose of connecting and disconnecting circuits without contact and sparking by virtue of those electronic components (such as switching transistors, triacs and other semiconductor components). Therefore, it is also known as non-contact switch.

Compared with the previous Electromechanical Relay (EMR), the SSR has no moving mechanical parts and no mechanical actions during its operation. It has advantages over EMR, such as fast response, high reliability, long life (SSR’s on-off times are a hundred time more than those of average EMR by 106 times), no noises, shock-proof, mechanical shock resistance, good moisture-proof and mildew-proof, anti-corrosion characteristics. These features make SSR widely used in military science, chemical industry as well as various industrial and civil electric control devices.