2 Position 25A Rotary Switch, 4 Pole

2 position 4 pole Rotary switches rated voltage 440V, it can be used to directly control the start, speed and commutation of small capacity motors, manufacturer direct sales.

Specification:

Dimensions (Unit=mm)
25A 4 Pole M2 Panel

Tips: Rotary switch maintenance

1. When the rotary switch is powered off, it will stop the auxiliary isolation first, then stop the main isolation.
2. Check the gas concentration before opening the cover. After opening the cover, check whether the cable of the wiring chamber is tight and whether there is any debris in the switch cavity; handle the explosion-proof surface of the switch.
3. The upper cover: restore the shift, switch power supply.
4. Perform a protection test on the rotary switch. Use appropriate tools and proper methods of operation during the inspection.