4 position 4 way electronic DIP switch is a dual in-line package switch that can be mounted directly on a circuit board to activate or deactivate different electronic circuits.
Specification
Model | CHN-DIP-4P |
Spacing | 2.54mm |
Number of Switch | 4 |
Number of Pin | 8 |
Maximum Operating Force | 8N |
Push Button Stroke | 2mm |
Operating Temperature | -20℃~+70℃ |
Storage Temperature | -40℃~+85℃ |
Contact Resistance | Initial Value: 50MΩ, After Test: 100MΩ |
Insulation Resistance | 100MΩ, 500VDC |
Compressive Strength | 500VAC/1min |
Interpolar Capacitance | 5pF |
Loop | SPST (Single Pole Single Throw) |
Electrical Life | Tested under voltage 24V DC and current 25mA, it can be dialed back and forth about 2000 times |
Rated Current | Does not Switch Frequently | 10mA, Withstand Voltage 50V DC |
Switch Frequently | 25mA, Withstand Voltage 24V DC |
Weight | 0.1kg |
Dimensions (Unit: mm)

Tips: DIP switch for PLC control system
DIP switches are widely used in data processing, communication, remote control and anti-theft automatic alarm systems, air showers and other products that require manual programming. If some data in the PLC control system needs to be modified frequently, you can use a multi-position DIP switch to connect to the PLC and set the data outside the PLC. In the figure, the COM terminal of the 4 position DIP switch is connected together with the COM terminal of the PLC. The 4 data lines of each DIP switch are connected to the 4 input points of the PLC in a certain order.

4 position 4 way DIP switch with 8 pins for sale, 2.54mm pin spacing, it is an electromechanical device to make manual changes to an electronic circuit. This micro SPST DIP switch is commonly mounted on a PCB, breadboard or motherboard.